Barrel-Lite bore inspection illuminator
£13.50
Barrel Lite bore inspection light.
This handy little tool is just what you need for illuminating barrels for inspection, works from any light source and no batteries are needed.
Firearms Inspection Made Easy
One Size Works for ALL calibers
Pistols
Rifles
Shotguns
Use “ANY” Form of light source
Sunlight
Room Light
Any lamp light source
Any Colored Light
Even Light from a Camp Fire
Never Replace Batteries or Bulbs
Uses Fiber Optics
No batteries needed
100% Maintenance Free
Easy on your eyes
Doesn’t blind you so you can see clearly in the barrel.
Handy Pocket Clip
Lightweight
Weighs less than an 1 oz.
Strong and Durable
Won’t break if dropped
Won’t turn Yellow
Uses high UHV plastic to protect against yellowing.
“HOW TO USE THE BARREL-LITE®”
“A Clean Firearm Is A Safe Firearm”
SAFETY FIRST!
Basic Instructions for Using The Barrel-Lite®
1. Make sure the firearm is completely unloaded and the action is open.
2. Open the action and insert the small end of the Barrel-Lite® into or against the shell chamber. (For shotguns you can also use either the larger or smaller end; Also works great for Bottom Loaders.
3. Hold the Barrel-Lite® by it’s sides and point the exposed end towards any light source, such as a lamp/ natural sunlight/ even a campfire will do. Colored lights work as well. Red lights will show as red, etc.
4. Now simply look down the barrel and adjust the position of the Barrel-Lite® for the best illumination. The stronger the light source, the brighter the Barrel-Lite® will be.
The Larger End is for Shotguns: 410 to 10 Gauge.
It will also work in some of the newer inline “Black Power Firearms”
The Smaller end is for all Pistols/Rifles: 38 caliber and up. Simply insert into the chamber.
For Smaller Calibers such as 22’s or 32 calibers simply place it against the chamber.